Victorian White & Black Border

The Victorian White and Black Border tiles have a matt finish and are listed as suitable for both floor and wall use, including in hallways. However, unlike some other tiles in the Victorian range, no specific R-rating slip resistance figure is listed in the product attributes for this tile, so if slip resistance is a priority for your hallway floor we would recommend confirming suitability with our team before ordering. The matt surface does naturally provide more grip than a polished or gloss finish, which is beneficial in an entrance hallway.

These border tiles are part of the Victorian range and are specifically designed to complement other tiles in the collection, such as the Victorian Black Mosaic or Victorian Red Mosaic field tiles. The black and off-white chequered pattern acts as a neat transitional strip, framing the main mosaic areas and giving the finished floor or wall a polished, period-accurate appearance. Sharing the same 6mm thickness as the other Victorian range tiles ensures a flush, consistent surface when they are installed side by side.

Each box contains one sheet covering 0.03m², with each sheet measuring 264 x 118mm. To estimate your requirement, measure the total perimeter length of the border run in metres and multiply by 0.118m (the tile width) to get the area in square metres, then divide by 0.03. For example, a bathroom with a 7-metre perimeter border would need approximately 28 boxes, plus an extra 10% for cuts and corners. Because each box covers a small area, it is worth measuring carefully to avoid ordering too few.